HBA 481064G Acrylic Foam Tape, 0.64 mm, Grey
HBA 481064G is the 0.64 mm grey grade of Derun's HBA acrylic foam tape series: a closed-cell acrylic foam carrier with high-tack acrylic PSA on both sides and a red PE release film. Total thickness 0.74 ± 0.02 mm, width 800 mm, 33 m per roll, 180° peel ≥43 N/inch at 30 min and ≥52 N/inch at 72 h, loop tack ≥36 N/in², static shear at 80 °C (1000 g) ≥120 min, elongation ≥800%.
Technical data
| Item | Value |
|---|---|
| Product / Item No. | 0.64mm grey tape · high-tack acrylic foam tape / 481064G red film |
| Adhesive thickness | 0.64 ± 0.02 mm |
| Release liner thickness | 0.1 ± 0.01 mm(red film) |
| Total thickness | 0.74 ± 0.02 mm |
| Width | 800 ± 4 mm（ASTM D5750-1995） |
| Length | 33 m/roll（ASTM D5750-1995） |
| 180° peel, 30 min | ≥ 43 N/inch（ASTM D-3330） |
| 180° peel, 72 h | ≥ 52 N/inch（ASTM D-3330） |
| Loop tack | ≥ 36 N/in²（ASTM D-6195） |
| Dynamic shear, 30 min / 72 h | ≥ 300 / ≥ 400 N/in²（ASTM D-1002） |
| Static shear @ 80 °C (1000 g) | ≥ 120 min（ASTM D-3654） |
| Elongation | ≥ 800 %（ASTM D-3759） |
Values are typical test results taken from the original TDS; test methods are given by the standard number in each row. Volume supply is subject to the mutually agreed specification.
Datasheet (TDS) download
Suitable / not suitable
Suitable
- Fixing automotive interior trim, emblems, wheel-arch mouldings and sill strips
- Structural bonding of glass, metal, PC, ABS and painted surfaces
- Curtain-wall stiffeners, cladding panels and channel letters
- Assemblies that must fill gaps and absorb vibration and shock
Not suitable / pre-treatment required
- Low-surface-energy materials such as PP and PE (corona, flame or primer treatment plus testing needed)
- Service above the temperature limit stated in the TDS
- Assemblies requiring damage-free rework (use an easy-pull tape instead)
- Use as the sole connection of a primary load-bearing structural member
Same-series grade comparison
| Grade | Thickness (mm) | 180° peel | Holding power @ 80 °C | Loop tack |
|---|---|---|---|---|
| HBA 48104G | 0.4 | ≥32 | ≥24 | ≥38 |
| HBA 481064G (this page) | 0.64 | ≥36 | ≥24 | ≥40 |
| HBA 48108G | 0.8 | ≥36 | ≥24 | ≥40 |
| HBA 48110G | 1.0 | ≥38 | ≥24 | ≥45 |
| HBA 48112G | 1.2 | ≥38 | ≥24 | ≥45 |
| HBA 48115G | 1.5 | ≥40 | ≥24 | ≥50 |
| HBA 48120G | 2.0 | ≥42 | ≥24 | ≥50 |
| HBA 48123G | 2.3 | ≥43 | ≥24 | ≥50 |
| HBA 48130G | 3.0 | ≥50 | ≥10 | ≥60 |
Request HBA 481064G samples / quotation
Tell us what you bond, the service temperature and the load case. Our technical team replies within 1 business day with a grade recommendation and sample plan.
Need a grade recommendation or samples?
Tell us the substrate, service temperature and load case — our engineers will recommend a grade and arrange samples.
Send enquiry / Request samples