HBA 48110G Acrylic Foam Tape, 1.0 mm, Grey
HBA 48110G is the 1.0 mm grey grade of Derun's HBA acrylic foam tape series: a closed-cell acrylic foam carrier with acrylic PSA on both sides and a white double-sided release paper. Tape thickness 1.1 ± 0.04 mm; 180° peel on steel ≥40 N/24 mm at 20 min and ≥50 N/24 mm at 72 h; loop tack ≥35 N; static shear at 80 °C (1000 g) ≥1440 min; short-term temperature resistance -20 to 120 °C, long-term -20 to 80 °C.
Technical data
| Item | Value |
|---|---|
| Product / Item No. | 1.0mm greyacrylic foam double-sided tape / 48110G |
| Tape thickness | 1.1 ± 0.04 mm（GB/T 7125-2014） |
| 180° peel on steel, 20 min | ≥ 40 N/24mm（GB/T 2792-2014） |
| 180° peel on steel, 72 h | ≥ 50 N/24mm（GB/T 2792-2014） |
| Static shear @ 80 °C (24 mm × 24 mm, 1000 g) | ≥ 1440 min（GB/T 4851-2014） |
| Static shear @ 25 °C (24 mm × 24 mm, 1000 g) | ≥ 10000 min（GB/T 4851-2014） |
| Loop tack (24 mm × 24 mm) | ≥ 35 N（GB/T 31125-2014） |
| Temperature resistance (short / long term) | -20 to 120 ℃ / -20 to 80 ℃ |
| Colour / Release liner | grey / white double-sided release paper |
| Recommended application temperature | 21 to 38 ℃（warm the tape before use at low temperatures） |
| Shelf life | 12 months（4–38℃、humidity 0–85% ） |
| Standard size | 800mm × 33m（non-standard slitting on request） |
Values are typical test results taken from the original TDS; test methods are given by the standard number in each row. Volume supply is subject to the mutually agreed specification.
Datasheet (TDS) download
Suitable / not suitable
Suitable
- Fixing automotive interior trim, emblems, wheel-arch mouldings and sill strips
- Structural bonding of glass, metal, PC, ABS and painted surfaces
- Curtain-wall stiffeners, cladding panels and channel letters
- Assemblies that must fill gaps and absorb vibration and shock
Not suitable / pre-treatment required
- Low-surface-energy materials such as PP and PE (corona, flame or primer treatment plus testing needed)
- Service above the temperature limit stated in the TDS
- Assemblies requiring damage-free rework (use an easy-pull tape instead)
- Use as the sole connection of a primary load-bearing structural member
Same-series grade comparison
| Grade | Thickness (mm) | 180° peel | Holding power @ 80 °C | Loop tack |
|---|---|---|---|---|
| HBA 48104G | 0.4 | ≥32 | ≥24 | ≥38 |
| HBA 481064G | 0.64 | ≥36 | ≥24 | ≥40 |
| HBA 48108G | 0.8 | ≥36 | ≥24 | ≥40 |
| HBA 48110G (this page) | 1.0 | ≥38 | ≥24 | ≥45 |
| HBA 48112G | 1.2 | ≥38 | ≥24 | ≥45 |
| HBA 48115G | 1.5 | ≥40 | ≥24 | ≥50 |
| HBA 48120G | 2.0 | ≥42 | ≥24 | ≥50 |
| HBA 48123G | 2.3 | ≥43 | ≥24 | ≥50 |
| HBA 48130G | 3.0 | ≥50 | ≥10 | ≥60 |
Other colours at the same thickness
| Grade | Thickness | Colour | Release liner |
|---|---|---|---|
| HBA 48110T | 1.0 mm | Clear | red PE release film(red film) |
| HBA 48110B | 1.0 mm | Black | red PE release film(red film) |
Request HBA 48110G samples / quotation
Tell us what you bond, the service temperature and the load case. Our technical team replies within 1 business day with a grade recommendation and sample plan.
Need a grade recommendation or samples?
Tell us the substrate, service temperature and load case — our engineers will recommend a grade and arrange samples.
Send enquiry / Request samples