HBA 48110T Acrylic Foam Tape, 1.0 mm, Clear
HBA 48110T is the 1.0 mm clear grade of Derun's HBA acrylic foam tape series: a closed-cell acrylic foam carrier with high-tack acrylic PSA on both sides and a red PE release film. Total thickness 1.1 ± 0.02 mm, width 800 mm, 396 m per roll, peel adhesion ≥3 kgf/inch, holding power at 80 °C ≥600 min, temperature resistance -10 to 80 °C.
Technical data
| Item | Value |
|---|---|
| Product / Item No. | 1.0mm clear tape · high-tack acrylic foam tape / 48110T red film |
| Adhesive thickness | 1.0 ± 0.02 mm |
| Release liner thickness | 0.1 ± 0.01 mm |
| Total thickness | 1.1 ± 0.02 mm（GB/T 18761-2007） |
| Width | 800 +40 mm（ASTM D5750-1995） |
| Length | 396 m/roll（ASTM D5750-1995） |
| Peel adhesion | ≥ 3 kgf/inch（GB/T 2792） |
| Holding power @ 80 °C | ≥ 600 min（GB/T 4851-2014） |
| Temperature resistance | -10 to 80 ℃（GB/T 4851-1998） |
| Release liner | red PE release film(red film) |
Values are typical test results taken from the original TDS; test methods are given by the standard number in each row. Volume supply is subject to the mutually agreed specification.
Datasheet (TDS) download
Suitable / not suitable
Suitable
- Fixing automotive interior trim, emblems, wheel-arch mouldings and sill strips
- Structural bonding of glass, metal, PC, ABS and painted surfaces
- Curtain-wall stiffeners, cladding panels and channel letters
- Assemblies that must fill gaps and absorb vibration and shock
Not suitable / pre-treatment required
- Low-surface-energy materials such as PP and PE (corona, flame or primer treatment plus testing needed)
- Service above the temperature limit stated in the TDS
- Assemblies requiring damage-free rework (use an easy-pull tape instead)
- Use as the sole connection of a primary load-bearing structural member
Same-series grade comparison
| Grade | Thickness (mm) | 180° peel | Holding power @ 80 °C | Loop tack |
|---|---|---|---|---|
| HBA 48105T | 0.5 | ≥30 | ≥24 | ≥40 |
| HBA 48108T | 0.8 | ≥32 | ≥24 | ≥44 |
| HBA 48110T (this page) | 1.0 | ≥35 | ≥24 | ≥45 |
| HBA 48115T | 1.5 | ≥40 | ≥24 | ≥50 |
| HBA 48120T | 2.0 | ≥40 | ≥24 | ≥60 |
| HBA 48130T | 3.0 | ≥45 | ≥10 | ≥60 |
Other colours at the same thickness
| Grade | Thickness | Colour | Release liner |
|---|---|---|---|
| HBA 48110G | 1.0 mm | Grey | white double-sided release paper |
| HBA 48110B | 1.0 mm | Black | red PE release film(red film) |
Request HBA 48110T samples / quotation
Tell us what you bond, the service temperature and the load case. Our technical team replies within 1 business day with a grade recommendation and sample plan.
Need a grade recommendation or samples?
Tell us the substrate, service temperature and load case — our engineers will recommend a grade and arrange samples.
Send enquiry / Request samples