HBA 48120T Acrylic Foam Tape, 2.0 mm, Clear
HBA 48120T is the 2.0 mm clear grade of Derun's HBA acrylic foam tape series, offered with either a red film or a PET liner. Red film version: total thickness 2.1 ± 0.02 mm, 180° peel ≥36.203 N/inch, static shear at 80 °C ≥360 min. PET version: total thickness 2.05 ± 0.02 mm, 180° peel ≥40 N/inch at 30 min and ≥50 N/inch at 72 h, loop tack ≥55 N/in², static shear at 80 °C ≥600 min, elongation ≥600%.
Technical data
| Item | Value |
|---|---|
| Product / Item No. | 2.0mm clear tape · high-tack acrylic foam tape / 48120T（red film / PET） |
| Adhesive thickness | 2.0 ± 0.02 mm |
| Total thickness (red film / PET version) | 2.1 ± 0.02 mm / 2.05 ± 0.02 mm |
| Width (red film / PET version) | 800 +40 mm / 800 ± 4 mm（ASTM D5750-1995） |
| Length (red film / PET version) | 231 m/roll / 33 m/roll（ASTM D5750-1995） |
| 180° peel, 30 min | red film version ≥ 36.203 N/inch；PET version ≥ 40 N/inch（ASTM D-3330） |
| 180° peel, 72 h (PET version) | ≥ 50 N/inch（ASTM D-3330） |
| Loop tack | red film version ≥ 44.614 N/in²；PET version ≥ 55 N/in²（ASTM D-6195） |
| Dynamic shear, 30 / 72 h (PET version) | ≥ 100 / ≥ 150 N/in²（ASTM D-1002） |
| Static shear @ 80 °C (1000 g) | red film version ≥ 360 min；PET version ≥ 600 min（ASTM D-3654） |
| Elongation (PET version) | ≥ 600 %（ASTM D-3759） |
| Release liner | red film or PET liner, per order |
Values are typical test results taken from the original TDS; test methods are given by the standard number in each row. Volume supply is subject to the mutually agreed specification.
Datasheet (TDS) download
Suitable / not suitable
Suitable
- Fixing automotive interior trim, emblems, wheel-arch mouldings and sill strips
- Structural bonding of glass, metal, PC, ABS and painted surfaces
- Curtain-wall stiffeners, cladding panels and channel letters
- Assemblies that must fill gaps and absorb vibration and shock
Not suitable / pre-treatment required
- Low-surface-energy materials such as PP and PE (corona, flame or primer treatment plus testing needed)
- Service above the temperature limit stated in the TDS
- Assemblies requiring damage-free rework (use an easy-pull tape instead)
- Use as the sole connection of a primary load-bearing structural member
Same-series grade comparison
| Grade | Thickness (mm) | 180° peel | Holding power @ 80 °C | Loop tack |
|---|---|---|---|---|
| HBA 48105T | 0.5 | ≥30 | ≥24 | ≥40 |
| HBA 48108T | 0.8 | ≥32 | ≥24 | ≥44 |
| HBA 48110T | 1.0 | ≥35 | ≥24 | ≥45 |
| HBA 48115T | 1.5 | ≥40 | ≥24 | ≥50 |
| HBA 48120T (this page) | 2.0 | ≥40 | ≥24 | ≥60 |
| HBA 48130T | 3.0 | ≥45 | ≥10 | ≥60 |
Request HBA 48120T samples / quotation
Tell us what you bond, the service temperature and the load case. Our technical team replies within 1 business day with a grade recommendation and sample plan.
Need a grade recommendation or samples?
Tell us the substrate, service temperature and load case — our engineers will recommend a grade and arrange samples.
Send enquiry / Request samples